Timer and Memory function
Using a Memory program
To achieve the same result when calling up a memory program, the same pot must be used. Quantities and sizes of ingredients must also be the same.
Switch the cooktop on.
Touch the M sensor.
P1 appears in the Timer/Memory display.
Touch the + sensor until the desired program number is displayed.
Touch the M sensor until a long audible tone zounds.
The associated cooking zone switches on and then off once the program has run. While the program is running, the cooking zone indicator light flashes and the program number is shown alternatively with the remaining time.
Checking the steps of Memory program
Switch the cooktop on.
Touch the M sensor.
Touch the + sensor until the desired program number is displayed.
The applicable power level appears in the relevant cooking zone display; the indicator lamp for that cooking zone flashes in the Timer/Memory display, and the time programmed for the power level appears. Times are displayed rounded off to the next full minute, but when the program is running the steps are timed to the second.
Deleting a Memory program
Switch the cooktop on.
Touch the M sensor.
Touch the + sensor until the desired program number is displayed.
Touch the - and + sensors at the same time until a long audible signal sounds and the dot behind the number goes out.
30