Timer and Memory function
Memory function
The settings used on a cooking zone from switching on to switching off can be saved as a memory program. Up to five processes that you frequently use can be saved as memory programs. Only one program can be recorded or used at a time.
Memory programs can be recorded for all cooking zones.
Each cooking zone can have more than one program recorded on it..
Saved programs are identified by a dot after the number.
Example:
P 1 Program not saved in memory P 1. Program saved
If all five programs are saved and you would like to save a new process, you must first delete a program.
Recording a Memory program
First, select a Memory program and then the cooking zone in the usual way.
The maximum time that can be recorded is 99 minutes with a maximum of 10 changes of power level.
Switch the cooktop on.
Touch the M sensor.
P1 appears in the Timer/Memory display.
Touch the + sensor until the desired program number is displayed.
Touch the M sensor until a long audible tone sounds.
Within 10 seconds of this, switch the desired cooking zone on.
Recording now begins.
During recording, the indicator light for the cooking zone being used flashes in the Timer/Memory display and the program memory lights up.
The process will be saved automatically when the cooking zone is switched off or if you touch M until a long signal sounds. After being saved, the program steps are displayed.
Times displayed are rounded off to the next full minute, but when the program is running the steps are timed to the second.
29