Safety features
Stop and Go
Your appliance is equipped with a feature which when activated reduces all active cooking zones to level 1. If you
If you wish to use this feature, you must first alter the factory setting (see "Programming").
When "Stop and Go" is activated
-the countdown of a programmed automatic
is interrupted. When deactivated, the time continues.
-the timer continues to run without interruption.
-the recording of a
Memory program will be cancelled.
Activate
Touch the sensor until you hear two consecutive acoustic signal tones.
Take care not to continue touching the sensor too long otherwise the safety lock will be activated.
The indicator light for the safety lock will begin to flash. The power of the cooking zones in use will be reduced to setting 1 and a 1 will appear in the corresponding cooking zone display.
Deactivation
Touch the sensor until the indicator light goes out.
The cooking zones will continue to operation at the last levels set.
33