Programming
You can change the programming of your appliance (see Table).
Proceed as follows:
With the cooktop switched off, simultaneously touch the ON/OFF cooktop sensor and the safety lock sensor until the indicator lamp for the safety lock flashes.
A P (Program) and an S (Status), each with a number, appear in the cooking zone display. They show the current setting.
First select the desired Program by touching the + or - sensors for the front left cooking zone, and then by . touching the + or - sensors of the front right cooking zone, set the desired Status (see Table). In this way you can change several programs one after the other.
To store the new settings in memory, touch the ON/OFF cooktop sensor until the displays go out. If you do not wish to store the displays in memory, touch the safety lock sensor until the displays go out.
38
