@äConversion to alternative types of gas
The appliance is set up for natural gas (NG).
When converting to alternative types of gas, the components as listed below have to be changed:
gas type |
| burner | jet | adj. | regulator | label | ||
New |
| Australia |
| in | screw of |
| for | |
Zealand |
|
|
|
| mm | control |
| gas type |
|
|
|
|
|
|
|
|
|
|
|
|
| small | N° 34 | 0.40 | No 1 |
|
| NG |
|
|
|
| NG | ||
|
|
|
| large | 2.0 | 0.88 alt. |
|
|
|
|
|
|
|
| 0.90 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| small | N° 7 | 0.23 | No 2 |
|
| LPG |
|
|
|
| LPG | ||
Propane |
| large | 1.12 | 0.52 |
|
| ||
|
|
|
| small | N° 7 | 0.23 | No 2 |
|
|
|
|
|
| ||||
LPG |
|
| — |
|
|
| LPG | |
|
|
|
| large | 1.12 | 0.52 |
|
|
|
|
|
|
|
|
|
|
|
Remarks
Changes for LPG Propane:
jets, adjusting screws, regulator, Pro- pane label.
Changes for LPG:
jets, adjusting screws, regulator, LPG label.
Conversion
Turn off the gas mains (if this ap- pliance has already been installed) and turn off the mains electrical sup- ply.
Remove the wok/pan support, the large burner cap, the burner ring and the large burner cap base.
With a
Pull the controls for the gas burner up and off.
Carefully raise the cooktop cover slightly at the rear and pull forward. Then carefully lift upwards and for- wards. Ensure that the earth lead which connects the cooktop and the control panel is not damaged.
37
