Milan Technology MIL-S8001TG 2. Hardware Description

2. Hardware Description

The Front Panel of the MIL-S8001TG switch consists of eight

10/100/1000Base-TX RJ-45 ports, one MINI GBIC slot, one LED-Indicator for

Power, three LED-Indicators (100/1000, LNK/ACT, FDX/COL) for each UTP

port, and two LED-Indicators (LNK/ACT) for the Mini-GBIC slot.

RJ-45 Ports (Auto MDI/MDIX): 8x 10/100/1000 N-way auto-sensing for

10Base-T, 100Base-TX or 1000Base-T connections.

[In general, MDI means connecting to another Hub or Switch while MDIX

means connecting to a workstation or PC. Therefore, Auto MDI/MDIX means

that you can connect to another Switch or workstation without changing

non-crossover or crossover cabling. ]

Mini GBIC slot: The optional MINI GBIC port is shared with port 1 and

supports 3.3V. There are 2 LED indicators for the Mini GBIC port – LNK and

ACT.

Contents

Main MIL-S8001TG User Guide Page Table of Contents Page 1. Introduction Figure 1-1. The MIL-S8001TG switch Features Software Features Package Contents Ethernet Switching Technology Management Methods 2. Hardware Description Front Panel Figure 2-1. Front panel for MIL-S8001TG Page LED Indicators Figure 2-2. LED Indicators Table 2-1. Description of LED Indicators Rear Panel Figure 2-3. The Rear Panel of MIL-S8001TG switch Desktop Installation Attaching Rubber Feet Power On 3. Network Application Small Workgroup Segment Bridge 4. Console Management Connecting a Terminal or PC to the Console Port Page 4-1. Main Menu 4-2. VLAN Mode 4-2-1. 802.1Q VLAN Configuration Page 4-2-1-2. VLAN Configuration 4-2-1-3. Create VLAN Group Page 4-2-1-4. VLAN Status 4-2-2. Port-Based VLAN Configuration 4-2-2-1. Port-Based VLAN Group Configuration 4-3. QoS Control Page Page 4-4. Broadcast Storm Suppression Page 5. Troubleshooting Incorrect connections Faulty or loose cables Non-standard cables Improper Network Topologies Diagnosing LED Indicators Cabling 6. Technical Specifications