Milan Technology MIL-S8001TG , Table 2-1. Description of LED Indicators

1 39

On Orange The port is operating in Full-duplex

mode.

Blinks Orange Collision of Packets is occurring in

the port.

FDX /COL

Off The port is operating in Half-duplex

mode or no device attached.

LNK (MINI

GBIC) On Green The port is successfully connecting

with the device.

ACT (MINI

GBIC) Blinks Green The port is receiving or transmitting

data.

Table 2-1. Description of LED Indicators

Contents

Main MIL-S8001TG User Guide Page Table of Contents Page 1. Introduction Figure 1-1. The MIL-S8001TG switch Features Software Features Package Contents Ethernet Switching Technology Management Methods 2. Hardware Description Front Panel Figure 2-1. Front panel for MIL-S8001TG Page LED Indicators Figure 2-2. LED Indicators Table 2-1. Description of LED Indicators Rear Panel Figure 2-3. The Rear Panel of MIL-S8001TG switch Desktop Installation Attaching Rubber Feet Power On 3. Network Application Small Workgroup Segment Bridge 4. Console Management Connecting a Terminal or PC to the Console Port Page 4-1. Main Menu 4-2. VLAN Mode 4-2-1. 802.1Q VLAN Configuration Page 4-2-1-2. VLAN Configuration 4-2-1-3. Create VLAN Group Page 4-2-1-4. VLAN Status 4-2-2. Port-Based VLAN Configuration 4-2-2-1. Port-Based VLAN Group Configuration 4-3. QoS Control Page Page 4-4. Broadcast Storm Suppression Page 5. Troubleshooting Incorrect connections Faulty or loose cables Non-standard cables Improper Network Topologies Diagnosing LED Indicators Cabling 6. Technical Specifications