Milan Technology MIL-S8001TG Power On

Power On

Connect the power cord to the power socket on the rear panel of the switch.

Connect the other end of the cord to an appropriate power outlet. The internal

power supply in the switch works with AC in the voltage range of 100-240VAC

and frequency 50~60Hz.

Check the power indicator on the front panel to see if power is properly

supplied.

Contents

Main MIL-S8001TG User Guide Page Table of Contents Page 1. Introduction Figure 1-1. The MIL-S8001TG switch Features Software Features Package Contents Ethernet Switching Technology Management Methods 2. Hardware Description Front Panel Figure 2-1. Front panel for MIL-S8001TG Page LED Indicators Figure 2-2. LED Indicators Table 2-1. Description of LED Indicators Rear Panel Figure 2-3. The Rear Panel of MIL-S8001TG switch Desktop Installation Attaching Rubber Feet Power On 3. Network Application Small Workgroup Segment Bridge 4. Console Management Connecting a Terminal or PC to the Console Port Page 4-1. Main Menu 4-2. VLAN Mode 4-2-1. 802.1Q VLAN Configuration Page 4-2-1-2. VLAN Configuration 4-2-1-3. Create VLAN Group Page 4-2-1-4. VLAN Status 4-2-2. Port-Based VLAN Configuration 4-2-2-1. Port-Based VLAN Group Configuration 4-3. QoS Control Page Page 4-4. Broadcast Storm Suppression Page 5. Troubleshooting Incorrect connections Faulty or loose cables Non-standard cables Improper Network Topologies Diagnosing LED Indicators Cabling 6. Technical Specifications