Milan Technology MIL-S8001TG

Priority ID Map Status: To display the current priority level setting for each

port, enter “s” or “S” at the command propmt. If the priority level is not

configured, the priority IP mapping will be undefined.

Restore to Default: Enter “r” or “R” at the command prompt to return the QoS

control values back to their defaults.

Previous Menu: Enter “q” or “Q” and the command prompt to exit the current

interface.

Contents

Main MIL-S8001TG User Guide Page Table of Contents Page 1. Introduction Figure 1-1. The MIL-S8001TG switch Features Software Features Package Contents Ethernet Switching Technology Management Methods 2. Hardware Description Front Panel Figure 2-1. Front panel for MIL-S8001TG Page LED Indicators Figure 2-2. LED Indicators Table 2-1. Description of LED Indicators Rear Panel Figure 2-3. The Rear Panel of MIL-S8001TG switch Desktop Installation Attaching Rubber Feet Power On 3. Network Application Small Workgroup Segment Bridge 4. Console Management Connecting a Terminal or PC to the Console Port Page 4-1. Main Menu 4-2. VLAN Mode 4-2-1. 802.1Q VLAN Configuration Page 4-2-1-2. VLAN Configuration 4-2-1-3. Create VLAN Group Page 4-2-1-4. VLAN Status 4-2-2. Port-Based VLAN Configuration 4-2-2-1. Port-Based VLAN Group Configuration 4-3. QoS Control Page Page 4-4. Broadcast Storm Suppression Page 5. Troubleshooting Incorrect connections Faulty or loose cables Non-standard cables Improper Network Topologies Diagnosing LED Indicators Cabling 6. Technical Specifications