Miller Electric 185 DX manual Routine Maintenance

. Complete Parts List available at www.MillerWelds.com

SECTION 8 − MAINTENANCE

.Follow the storage procedure in the engine owner’s manual if the unit will not be used for an extended period.

8-1. Routine Maintenance

				Stop engine before maintaining.
			Recycle engine	. See Engine Manual and Maintenance Label
			fluids.	for important start-up, service, and storage
				information. Service engine more often if
				used in severe conditions.
n = Check	Z = Change	~ = Clean	l = Replace	Reference
* To be done by Factory Authorized Service Agent

Every			Section 5-3,
8			5-4
Hours
n Fuel Level	n Oil Level	~ Oil, Fuel Spills
Every			Section 8-2
25
Hours
~ Air Cleaner Precleaner
Every
50
Hours
~ Weld Terminals
Every			Engine
100			Manual,
Hours			Section 8-2
Z Oil	nl Air Cleaner Element	~ Cooling System	n Spark Plug Gap
~ Battery Terminals (DX	n~ Spark Arrestor Screen
Models)	(Optional on DX Models)
Every
200
Hours
l Unreadable Labels
Every			Engine
300			Manual
Hours
nValve Clearance*
Every			Engine
500			Manual
Hours
nl Weld Cables	n~ Slip Rings*
	nl Brushes*
			OM-4415 Page 27