Miller Electric Maxstar 200 STR manual Installation, Specifications

SECTION 4 − INSTALLATION

4-1. Specifications

Input Power	Rated Output	Welding	Max.	Amperes Input At Rated Output, 50/60Hz				KVA	KW
		Amperage	Open-Circuit
		Range	Voltage	115	230	400	460
Three-Phase	150 A @ 26 VDC,	1 − 200	80∇	-−	13.1	7.4	6.4	5.2	5.0
Stick Process	60% Duty Cycle		♦		0.16*	0.24*	0.25*	0.06*	0.03*
			9-14
Three-Phase	175 A @ 17 VDC,	1 − 200	80		10.5	6.0	5.2	4.2	4.0
TIG Process	60% Duty Cycle		9-14♦	-−	0.16*	0.24*	0.25*	0.06*	0.03*
Three-Phase	200 A @ 28 VDC,	1 − 200	80∇		18.4	10.3	8.9	7.3	7.0
Stick Process	30% Duty Cycle		♦		0.16*	0.24*	0.25*	0.06*	0.03*
			9-14
Three-Phase	200 A @ 18 VDC,	1 − 200	80		12.7	7.2	6.2	5.1	4.9
TIG Process	40% Duty Cycle		9-14♦		0.16*	0.24*	0.25*	0.06*	0.03*
Single-Phase	150 A @ 26 VDC,	1 − 200	80∇	-−	21.7	-−	10.6	5.0	5.0
Stick Process	60% Duty Cycle		♦		0.23*		.25*	0.05*	0.02*
			9-14
Single-Phase	175 A @ 17 VDC,	1 − 200	80		17.4	-−	8.5	4.0	4.0
TIG Process	60% Duty Cycle		9-14♦	-−	0.23*		.25*	0.05*	0.02*
Single-Phase	125 A @ 25 VDC,	1 − 200	80∇	34.1	-−	-−	-−	4.0	3.8
Stick Process	50% Duty Cycle		♦	0.42*				0.05*	0.03*
			9-14
Single-Phase	150 A @ 16 VDC,	1 − 200	80	29.7	-−	-−	-−	3.4	3.4
TIG Process	70% Duty Cycle		9-14♦	0.42*				0.05*	0.03*
Single-Phase	100 A @ 24 VDC,	1 − 200	80∇	28.1	-−	-−	-−	3.2	3.2
Stick Process	80% Duty Cycle		♦	0.42*				0.05*	0.03*
			9-14
Single-Phase	125 A @ 15 VDC,	1 − 200	80	23.0	-−	-−	-−	2.6	2.6
TIG Process	100% Duty Cycle		9-14♦	0.42*				0.05*	0.03*

*While idling

♦Low open-circuit voltage while in Lift-Arcton all models, and Stick on models with stock numbers 907 036 and 907 037. ∇Normal open-circuit voltage (80 volts) is present while in the Stick process for models with stock number 907 220. NOTE: Duty cycle limitations on units with 115 volt input power are due to the input power cord supplied with the unit.

NOTE: This unit is equipped with Auto-Linet. The Auto-Line circuitry automatically connects to 120−460 VAC, single- or three-phase power without removing the cover to relink the power source.

OM-2233 Page 12