![](/images/new-backgrounds/1315403/31540371x1.webp)
9-3. Holding And Positioning Welding Gun
NOTE
Welding wire is energized when gun trigger is pressed. Before lowering helmet and pressing trigger, be sure wire is no more than 1/2 in (13 mm) past end of nozzle, and tip of wire is positioned correctly on seam.
1 |
|
| 1 | Hold Gun and Control Gun |
|
|
|
| Trigger |
|
|
| 2 | Workpiece |
|
| 3 | 3 | Work Clamp |
| 2 | 4 | Electrode Extension (Stickout) | |
|
| |||
|
|
| 1/4 to 1/2 in (6 To 13 mm) | |
|
|
|
| |
|
|
| Hold a shorter stickout when | |
5 |
|
| welding with solid wire and using a | |
|
| shielding gas. | ||
|
|
| 5 | Cradle Gun and Rest Hand on |
|
|
|
| Workpiece |
4 |
|
|
|
|
90°
90°
End View of Work AngleSide View of Gun Angle
GROOVE WELDS
45°0°-15°
45°
End View of Work Angle | Side View of Gun Angle |
|
FILLET WELDS |