5-6. Selecting A Location And Connecting Input Power
18 in (457 mm) of space for airflow
YDo not move or operate unit where it could tip.
YSpecial installation may be required where gasoline or volatile liquids are present − see NEC Article 511 or CEC Section 20.
YInstallation must meet all Na- tional and Local Codes − have only qualified persons make this installation.
YDisconnect and lockout/tag- out input power before con- necting input conductors from unit.
YAlways connect green or green/yellow conductor to supply grounding terminal
first, and never to a line ter- minal.
1 Rating Label
| =GND/PE Earth Ground |
| Supply correct input power. | ||||
| 1 |
|
| 2 | Black And White Input | ||
|
|
|
| Conductor (L1 And L2) | |||
| 6 |
|
| 3 | Green Or Green/Yellow | ||
|
|
|
| Grounding Conductor | |||
|
|
|
| 4 | Input Power Cord. | ||
|
| 9 |
| 5 | Disconnect Device (switch | ||
|
|
|
| shown in the OFF position) | |||
|
|
|
|
| |||
|
|
|
| 6 | Disconnect Device Grounding | ||
|
| 5 |
|
| Terminal |
| |
|
|
| 7 | Disconnect Device Line | |||
|
|
|
| ||||
|
| 7 |
|
| Terminals |
| |
|
|
| Connect | green or | green/yellow | ||
|
| L1 |
| ||||
|
| 2 | grounding conductor to disconnect | ||||
|
|
| |||||
|
| L2 | device grounding terminal first. | ||||
|
|
| |||||
| 3 |
|
| Connect input conductors L1 and | |||
|
|
| L2 to disconnect device line | ||||
|
|
|
| ||||
|
| 4 |
| terminals. |
|
| |
|
|
|
|
|
|
| |
| 10 |
|
| 8 | Receptacle (NEMA | ||
1 |
|
| Connect receptacle as shown. | ||||
|
|
| |||||
|
|
|
| 9 | |||
|
|
|
| Select type and size of | |||
|
|
|
| protection using Section | |||
|
|
|
| disconnect switch shown). | |||
|
|
|
| Close and secure door on disconnect | |||
|
|
|
| device. | Remove | lockout/tagout | |
| 8 |
|
| device, and place switch in the On | |||
|
|
|
| position. |
|
| |
| L2 | L1 |
| 10 | Plug (NEMA | ||
|
|
|
|
|
| ||
Connect plug to receptacle.
230 VAC, 1
ssb2.2* 1/94 − 804
