OM-1594 Page 13
SECTION 5 − INSTALLATION

Be sure that contact tip, liner, and drive rolls are correct for wire size and type. See

Parts List to change parts as needed.

NOTE

Many procedures apply to both guns covered in this manual. Where procedures

differ, separate instructions are given.

NOTE

5-1. Connections With A Constant Current (CC), Constant Voltage (CV) Or Constant

Current/Constant Voltage (CC/CV) Welding Power Source Having A 14-Socket

Receptacle

801 559-D / Ref. 151 666-G
1 CC, CV Or CC/CV Welding
Power Source
2 24 VAC/Contactor Control
14-Pin Plug
3 Workpiece
4 Voltage Sensing Lead
(Optional)
Connect lead to workpiece for CC
welding only.
5 Gun
6 Wire Feeder
7 24 VAC/Contactor Control
Cord
YDo not use gas pressure
above 50 psi (345 kPa).
8 Gas Cylinder
1
2
3
4
5
7
8
6
5