OM-1594 Page 11

3-3. Symbols And Definitions

Some symbols are found only on CE products.

Note

AAmperes VVolts Alternating Current XDuty Cycle
IP Degree Of
Protection Hz Hertz Circuit Breaker Wire Feed
Jog Output Trigger Gun
Press To Set Increase Trigger Hold On Trigger Hold Off
Purge Spot Weld Time Percent Run-In
Burnback Time U1Primary Voltage U2Load Voltage Read Instructions
I1Primary Current I2Rated Current Line Connection Water (Coolant) In-
put
Water (Coolant)
Output Fuse Continuous
Spot Welding

SECTION 4 INTRODUCTION

4-1. Specifications

Type of Input
Power Welding Power
Source Type Wire Feed
Speed Range
Wire
Diameter
Range
Welding
Circuit Rating Overall
Dimensions Weight
24 Volts AC
Single-Phase
5 Amperes
50/60 Hertz
Constant Voltage (CV)
DC For GMAW Or
Constant Voltage(CV) /
Constant Current (CC) DC
For GMAW-P
All Need 14-Pin And
Contactor Control
70 To 875 ipm (1.8
To 22.2 mpm)
.030 To .062 in
(0.8 To 1.6
mm)
Max Spool
Capacity: 12 in
(305 mm)
All Models: 100%
Duty Cycle, 100
Volts;
Water-Cooled
Models: 400
Amperes,
Air-Cooled
Models: 200
Amperes
Length: 21-1/4 in
(540 mm)
Width: 9-1/2 in
(241 mm)
Height: 16 in
(406 mm)
38 lb
(17.2 kg)