![](/images/new-backgrounds/1119023/119023289x1.webp)
Chapter 7 |
Transmission Applications
| 7 | Transmission Applications |
|
|
7.11TX Stamp
TX Stamp
When transmitting a fax via the ADF, a stamp can be affixed to the pages of the document that have already been scanned, allowing you to confirm that these pages have been scanned. The stamp is a pink circle ( ), 4 mm in diameter and affixed at the rear edge on the front side of the original document. When both sides of a sheet are transmitted, the stamp is affixed respectively on the front side.
Front surface of
original document
Original document
transmitting direction
Stamp position
0Specifications
The stamp ink must be replaced when it runs out. When color of the verification stamp becomes light, contact your service representative for a replacement.
When mixed original mode is selected, no stamp may be affixed to the above position.
Even though the TX Stamp function has been set, no TX Stamp is put if the document is transmitted in the
Check if the document was correctly transmitted by the Transmission Report or Transmit Result of the CHECK MODE.
1Press [Fax] on the control panel to view the FAX screen, if it is not already displayed.
2Press [Scan Setting] and then press [Application].
Network Fax |