Minolta C352, C300 manual Fax Id

Chapter 13

Appendix

13 Appendix

Terms		Description
F	Factory default	The value set at the factory. You can change
	setting	some defaults by the Utility Mode. It is useful
		to set the value that you use frequently as the
		default.
	FAX ID	The ID code to recognize each other at the
		fax communication. The telephone number is
		usually registered as the FAX ID.
	F-code	It defines the use of the sub-address of T.30*
		standardized by ITU-T. You can use various
		functions of the F-code in the fax communi-
		cation among facsimiles supporting the F-
		code function even if their manufactures are
		different. In this machine, the F-code is used
		in the bulletin board, relay request, confiden-
		tial communication and ID transmission. (*
		This is one of the communication standards.)
	Frame Erase	The function to erase dark bands reproduced
		when the original is a book or read with the
		ADF left open.
G	G3	One of the fax communication modes stand-
		ardized by ITU-T. There are G3 and G4 in the
		communication mode. G3 is the most used
		communication mode now.
	Group	To group multiple abbreviated numbers. It is
		useful if you frequently use the sequential
		multiple station transmission or the polling
		reception. You can register up to 500 abbre-
		viated numbers in a group.
H	Horizontal	The horizontal direction when the original is
	scanning	scanned.
L	Long original	The function to transmit pages longer than
		the length (420 mm/16.5 inch) of 11 × 17 size.
		If you attempt to send such a long document
		without selecting Long original mode, paper
		misfeed will occur. When Long original mode
		is selected, pages of up to 800 mm can be
		transmitted.

13-8 Network Fax