![](/images/new-backgrounds/1119023/119023135x1.webp)
Transmission | 3 |
|
3.6.2Specifying only destination (IP Address Fax)
The following methods can be used when specifying 1 destination.
-Program
-Address Book
-Direct Input
Program
When a destination has been registered for program, it can be selected by pressing Program.
1 Press [Program] in the FAX screen.
2 When sending a message in the color mode, select [Color].
–When [Color] is selected, addresses (Address Book, Group, Program) displayed are limited only to those in which the model type of the other party is set to [Color].
3 Select the programmed destination you want to use.
Chapter 3 |
Transmission
–Press or
when desiring to display the next or previous screen.
The destination that has been specified is displayed in the Broadcast Destinations.
4 Press [Start].
Transmission begins.
Network Fax |