Minolta C300, C352 manual Initial Setting

Utility Mode

10.5Initial Setting

Set the default of the Fax function.

10

It is possible to set a Fax function that is selected when the Main Power is turned on or when [Reset] is pressed.

For this setting, display the Fax screen and press the [Utility/Counter] on this screen.

Item		Description	Available value
	Fax	[Current Setting]:	Current Setting / Fac-
		Before entering the Utility Mode, each of	tory Default*
		the items that have been set on the touch
		panel is registered as the default of fax
		function.
		[Factory Default]:
		Values set when shipped from the factory
		are registered as the default of fax function.

*indicates factory default setting.

Initial Setting

1 Open the User Setting screen (See "Entering User Setting" on page 10-2).

2 Press [Initial Setting].

Chapter 10

Utility Mode

–Some items may not be displayed depending on the optional settings.

–In the Utility Mode, it is also possible to enter a number displayed in the key through the keypad for selection. In the case of [Initial Setting], enter 3 through the numeric keypad.

Network Fax 10-21