Minolta C300, C352 manual Sender infor Information such as transmission date Mation

Appendix 13

Terms		Description
S	Sender infor-	Information such as transmission date,
	mation	name, telephone number, and page number
		printed at the top of the received document
		at the fax transmission.
	Sender name	The name of this machine, which is repre-
		sented with any alphanumeric character and
		symbols. It is recorded as the part of the orig-
		inating printing at the top of the received doc-
		ument on the receiver side.
	Substitute	The function to transfer/transmit the received
	Transmit	documents waiting for output by using the
		control panel. Substitute transmission can be
		set when the FAX screen is displayed, and
		operation has been interrupted at out of pa-
		per or paper jammed in the machine.
	Super G3 (SG3)	This is the G3 communication mode that is
		ITU-T V.34 compliant. It can communicate
		faster (up to 33,400 bps) than normal G3
		communication.
T	Timer TX	The function to specify the time to start com-
		munication. You can save costs by specify-
		ing a transmission to start at midnight or early
		in the morning during which telephone charg-
		es are less.
	Total page set	The function to place the total number of
		pages on each page of the fax in quick mem-
		ory transmission. It is useful for the recipient
		to make sure whether all pages of the fax
		have been sent or not (the total number of
		pages are automatically placed in memory
		transmission).
	Transmission	The transmission rates of the modem in the
	rates	facsimile. It can transmit in high-speed
		33,600 bps. If it is set to Overseas TX. The in-
		ternational communication. In Overseas TX,
		a lower baud rate will be employed. Select
		this mode if you send a fax to the location at
		which the communication condition is poor
		even if it is in your country. It transmits in
		noise-resistant 7,200 bps or 4,800 bps.
	Transmission	The time to send a fax. The higher resolution
	time	is, the longer it takes to transmit.
U	Upside down	The function to specify the appropriate bind-
		ing style when transmitting a two-sided doc-
		ument (i.e., when pages are printed on both
		sides). The binding style you select should al-
		low the pages of a two-sided document to be
		read appropriately by paging right to left or
		top to bottom.

Chapter 13

Appendix

Network Fax 13-11