Mitsubishi G-50A manual Starting the On-Line MonitorG-50connection, In case for local connection

1.4.3 Starting the On-Line Monitor(G-50 connection)

*To use the maintenance tool via G-50 (Network), license registration for the G-50 to be used is necessary. Purchasing the license No. for each G-50 to be used, conduct the license registration through the Web browser (http://[IP address of the G-50A]/ administrator.html). After selecting "Maintenance tool" of the optional function on the Web Browser Screen displayed, enter the purchased license No..

For the detail of the license registration, see Chapter 4 [Registering a License for Optional Functions] of Central Controller Model: G-50A Web Browser Operation Manual (For manager).

*To use the maintenance tool via G-50 (Only for LAN mode and Dialup connection mode), please check a setup of Internet Connection Firewall of PC. If the FIREWALL function is used, communication will be normally impossible with G-50A, and normal data will not be displayed.

For detail, please refer to [6. How to change setting of Firewall] on Page 57.

In the case of permanently installing an anti-virus software and always started under this environment, the fire wall function of this software may be activated sometimes. In such case, The normal communication with G-50 will be hindered not displaying data normally. When operating Maintenance Tool, finish the anti-virus software once or remove the fire wall function.

1.4.3.1 In case for local connection

In the case when on line monitoring is applied to air conditioning system via G-50 by connecting the maintenance tool to LAN locally.

(1)Clicking "G-50(Network)" on the selection screen of Monitor mode selects "Local connection" simultaneously.

Last click " ."

(2)Next IP address input screen is displayed. Here,input IP address of G-50A connected to the air conditioning system of which operating information is desired to

monitor, and click on .

Request

It is required to set to the IP address in the same system with G-50 to be connected to Maintenance Tool PC from

[Control Panel].

13