(2)Automatic monitoring
To automatically monitor the contact status of indoor units of No.1 ~ 50 repeatedly,
select the [Auto monitor] mode.
a)Click the [Auto monitor] button on the mode selection section.
The contact status of indoor units of No.1 ~ 50 will automatically be monitored, and this operation will be repeated.
The display for [Attribute], [Indoor unit contact mode], [Input contact (monitor)] and [Output contact (monitor/operation)] are identical to that in the manual monitoring.
*In the case to terminate the auto mode, selecting other mode will stop the monitoring.
3.11.3Operation of output contact
(1)Contact operation
To operate for the ON/OFF selection of the output contact of indoor units, select the [Operation contact] mode.
a)Click the [Operation contact] button on the mode selection section.
b)Click the [Output contact (ON/OFF)] button of the unit for which the ON/OFF of the output contact
is desired to be selected for change.
*The state where the button is being depressed (with bold letter) displays the present output status.
[Option] function
Affixing a check mark to [It checks before transmission] displays the warning screen as shown right before transmitting actual transmission command at the operation of output contact.
To continue the transmission, click [Yes].
When a check mark is not affixed, the transmission command will be transmitted at the clicking of the [Output contact (ON/OFF)] button simultaneously.
3.11.4 Termination of this function
(1)Clicking the [Close] button will close this screen and return to the main screen display.
45
