Mitsubishi MN Converter, G-50A manual 3.7.21 30

When [Mail communication Mode] is selected, the setting items of mail communication will be displayed.

- From: Mail Address

Set the mail address of the G-50A in the [From: Mail Address] field. When sending mail via an ISP, set the mail address allocated by the ISP. When the mail server resides on the LAN, obtain the mail address from the LAN administrator.

*When sending mail via an ISP, a user contract with the ISP is required.

-To: Mail Address

Set the mail addresses of the recipients to which mail is sent.

*The mail address of recipient (To:) acquires and sets up the address only for maintenance tools.

-SMTP Server IP

Set the mail server IP address in the Mail Server Information [SMTP Server IP] field. When sending mail via an ISP, set the ISP address of the ISP mail server. When the mail server resides on the LAN, obtain the IP address from the LAN administrator.

*If the only information available on the ISP mail server is a domain name, use a PC to connect to the Internet, open a DOS prompt and type “ping domain name”. Set the IP address that is displayed as the ping response.

-Monitor Finish Data

Set the date of monitor data transmit period.

- Mail Sending Interval

Set the transmit interval of monitor data (max 240 min).

Then click on .

After a while, it returns to the main screen, but the mail transmission to remote receivers will be performed by G-50A automatically.

*At the connection of MN Converter “the screen to select monitor method” is not displayed. Real-time Monitor Mode is always commenced not allowing to use [Mail communication Mode].

(6)In the case of real time monitoring, the message “Monitoring. Please wait for a moment.” will appear again.

(7)Momentarily, the Operation Status Monitor Screen will appear.

3.7.2(1)

30