Mitsubishi MN Converter, G-50A Operation Monitor, 4.3.1Off-LineAnalyzing, Items Performed Here

4.3 Operation Monitor

*Items Performed Here

-Monitors and prints about the System Information and the Operating Data of units saved using the on-line monitor.

4.3.1Off-Line Analyzing

(1)Click on to display the data list screen of Operation Monitor.

(2)Click on [Monitor Data] desired to be monitored.

(3)Click on .

Notice: This covers the operation with the menu of the right-clicking of the mouse.

(Refer to 4.6.6 Right-clicking menu.)

(b)

(4) Operation Status Monitor Screen

(a)Click on the buttons to display data from one minute before or one minute after.

(b)”Menu Bar”

The menu bar displays [Return], [Print], [Time-Searching], [Help].

-Click on [Return] to end the Operation Status

Monitor Screen. [Refer to (c)]

-Click on [Print] and then select “Print screen” from the sub-menu.

The hard copy of the screen will be printed from the connected printer.

.

-Click on [Time-Searching] and the Time Searching Screen will appear.

Enter the [Date] and [Time]. (When entering the time, refer to the monitor data time.)

Once the time has been entered, click on . The entered data will appear.

If no time data has been entered, data for the nearest time will appear.

Notice: Set the data/time to be entered to the time presented within the monitor data.

Setting to the time outside of the monitor time may cause to disable the search function.

48