Troubleshooting
Problem
I cannot connect to an Access Point.
I can connect to an Access Point but I cannot connect to the Internet.
I cannot connect to another station with a wireless LAN device.
Action
3.Restart your computer and repeat the software installation following the
instructions contained in this User Guide.
•Check if the Network Type of the device is set to Infrastructure mode.
•Check if the device has the same Service Set Identifier (SSID) as that of the AP.
•Check if the device and the AP have the same Encryption. If WEP encryption is enabled, set the same WEP keys for the device and the AP.
•Check if the MAC address of the device is added in the AP Authorisation Table. Confirm this with your LAN administrator.
•There is poor signal reception. Shorten the distance between the device and the
access point.
•Check if the device and the AP have the same Encryption. If WEP encryption is enabled, set the same WEP keys for the device and the AP.
•Make sure the network protocol parameters (IP address, subnet mask, gateway, and DNS) of your computer are correctly set.
•Check the proxy settings of the web browser.
•Check if the Network Type of the device is set to
•Check if the device has the same Service Set Identifier (SSID) with that of the other station.
•There is poor signal reception. Shorten the distance between the device and the station.
Diamond Digital A101 Wireless USB Adaptor |
