Chapter 3 - Reference

Channel

Use the Channel field to select the radio channel for A111 card. In an infrastructure network, your A111 will automatically select the correct frequency channel required to communicate with an Access Point, this parameter will be fixed in Auto and cannot be changed. In an Ad Hoc network, you can decide the channel number for the A111 card. Any WLAN card can communicate in the same network if they have the same frequency channel setting.

Data Rate

Select the transmit data rate (fixed or auto). The data rates supported for the WLAN Cards are:

Auto – The adapter will adjust to the most suitable transmission rate.

Fix – 11g: Fix data rate to 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54 Mbps.

11b: Fix data rate to 1, 2, 5.5, or 11 Megabits per second.

Others

Encryption – Click on this to show the Encryption tab.

Advanced – Click on this to show the Advanced tab. In most cases, the default values do not have to be changed.

Troubleshooting – Click on this to show the Troubleshooting utility.

Click on Apply to save and activate the new configuration.

Chapter 3 Wireless Settings

A111 Wireless Card Adaptor

23

Page 23
Image 23
Mitsubishi Electronics A111 user manual Reference Channel, Data Rate, Others