Configuring the Wlan utility | Mitsubishi Electronics A111 instruction

Chapter 2 - Installation

Quick Start

Chapter 2

6.Windows XP users: When the program is launched for the first time (during Windows restart), you will be asked which function to use. Choose the Diamond Digital WLAN utlities to access the functions listed in Chapter 3.

7.Carefully insert the A111 card into your computer’s PC card slot. Windows will au- tomatically find and configure the WLAN card using the drivers installed in the previ- ous steps.

Configuring the WLAN utility

After installing the A111 WLAN Card Utilities, you will need to make some settings before being able to use your wireless connection. Double-click the WLAN Control Center icon to start the utility.

1. Right-click the WLAN icon and select	2. Set the Network Name (SSID) to the same
WirelessSettings	name as the SSID set in your wireless ac-
	cess point.

6	A111 Wireless Card Adaptor

Image 6

Mitsubishi Electronics A111 user manual Configuring the Wlan utility

Contents

Wireless Card Adaptor User’s Manual A111 Wireless Card Adaptor Disclaimer InstallationProcedures InstallationSystem Requirements Installation Installing the A111 utilities and driver ClickInstallA111WLANCardUtilities/Driver Configuring the Wlan utility Quick Start Select Soft AP Mode Soft AP Windows XP Only Access Control Soft AP Access Control and WDSAccess Control and WDS Settings Network Range Extension To disable this function Reading the A111 Status Indicators LNK Link LEDACT Activity LED ChapterOverview ReferenceAdditional Reference Windows XP Wireless Options Using the Control Center Taskbar A111ControlCenterStarting the Control Center manually Reference Wireless Status Icons on the taskbar Taskbar Icon Launch Wireless Settings Reference Taskbar Icon Right MenuTaskbar Icon Left Menu Wireless Settings Utility Starting Wireless SettingsStatus Status Tab Current Channel Reference Association StateMAC address Current Data Rate Activate Configuration Reference Radio StateSave as Profile Frame Sent/Received Frame ErrorStatus Connection Tab Connection Quality Status IP Config Tab Button Network Type Config Basic TabAs Wireless LAN Network Name Ssid Reference Channel Data RateOthers Config Encryption Tab Data encryption WEP enabledWireless Network Key Default Key Two ways to assign WEP keys Reference 64/128-bit versus 40/104-bit Survey Site Survey Tab Buttons About Version Info Tab Exit Wireless Settings Link State Ad Hoc Software Reference Windows XP Wireless Properties Wireless Properties Chapter Reference Windows XP Wireless Properties Cannot connect to any Access Points TroubleshootingVerify if the A111 card is installed correctly Verify that the Network Type is in Infrastructure mode Bad link quality or bad signal strength Cannot connect to a Station A111 Card Glossary Default Key Cofdm for 802.11a or 802.11gDevice Name DSL Modem Digital Subscriber Line Dhcp Dynamic Host Configuration ProtocolDNS Server Address Domain Name System Direct-Sequence Spread Spectrum for 802.11b Encryption Extended Service Set ESSEssid Extended Service Set Identifier Ethernet Ieee Ieee 802.11a 54Mbits/sec Ieee 802.11g ISP Internet Service ProviderIeee 802.11b 11Mbits/sec Infrastructure NAT Network Address Translation MAC Address Media Access ControlLAN Local Area Network NIC Network Interface Card Preamble Ssid Service Set IdentifierWeca Wireless Ethernet Compatibility Alliance Radio Frequency RF Terms GHz, MHz, Hz Wlan Wireless Local Area Network WPA Wi-Fi Protected Access Service Contacts Western Australia