Mitsubishi Electronics CK-32307, CK-35308 manual TV+VCR+antenna or cable without a cable box cont

TV+VCR+antenna or cable without a cable box

(cont.)

procedure

(See illustration on the :Following page.)

O Connect the incoming cable or anterma to the ANTENNA IN terminal on the VCR.

OConnect one end of a coaxial cable to t_ae ANTENNA OUT terminal on the VCR.

O Connect the other end of the cable to the antenna terminal on the TV.

Connect an RCA pin-type video cable to the VIDEC OUT termi- nal on the back of the VCR. Connect Lhe other end. of this cable to the VIDEO INPUT terminal on the back of the television.

_>Important:	If you	are connecting a Super	VHS (S-VHS)	VCR, use a Super Video
	cable instead of an RCA pin-type video cable. Connect a Super
	Video	cable to the S-VIDEO	OUT terminal	on the VCR. Connect
	the other end of this cable to the S-VIDEO INPUT terminal on the
	back	of the television.

Connect a set of RCA pin-type audic, cables to the AUDIO OUT

terminals on the back of the VCR. U_,_the red cable to connect

the right (R) channel and the white cable for conne,_ting the left

(L) channel.

O Connect the other ends of this cable tc the AUDIO INPUT

	terminals	on the	back	of the television.
[:>Important:	If your VCR	is monaural		(non-stereo),	you will only	co_nect	a single
	RCA pin-type	audio	cable.	Connect	the (.,able to the	VCR,	then

connect the other end to the L (LEFT) audio input on the back of the television.

[>Important: If your VCR has the video channel switcl:.,, set to "OFF/AV" mode. See your VCR's owner's gu,ide for detaii[s.

O Set the VCR to the playback mode.

O To view the VCR, select the external i:aput source by using the INPUT button on the control panel or remote control.

Basic Connections 29