Mitsubishi Electronics CS-35207, CK-35308, CK-32307, CS-40307 manual Changing channels

_Important:

_Important:

_Important:

Changing channels

Your TV offers you four ways of changing channels once their

numbers have been programmed into channel memory:

•selecting channels one-by-one with the channel controls,

•directly accessing a channel by pressing the number buttons,

•using the QuickView option to recall the last channel,

•using the special QuickView opticn to switch to a particular memorized channel, and

•using the SuperQuickView function to alternate between channels on a user.-chosen list.

To change channels faster, use either of the following procedures:

•Enter three digits for every channel number, using zeros where needed. For example, enter 004 tc view channel 4 and 028 to view channel 28 or,

•Press the ENTER button after ,;electing the number of the channel. For example, press 4 and ENTER to view channel 4.

Cable channel numbers 0 and greate:r than 126 are not used.

TV stations 0, 1, and 7'0 through 999 are not used If you select one of these channel numbers, your TV _ill not change channels.

If you memorized channels using the Indoor/Outdoor Antenna, your' TV can receive antenna channels 2-13 (VHF) and 14-69 (UHF). If you memorized channels using the C able Antenna, your TV can receive cable channels 1-125. If you ,_elect a channel outside of the memorized range, your TV will not change channels.

46 Chapter 3: Operating Your TV