Mitsubishi Electronics CK-32307, CK-35308, CS-35207, CS-40307 manual boxes and other components cont

Using the remote control to operate VCRs, cable

boxes and other components (cont.)

0Press the POWER button again. Your cable box should turn off. If the cable box turns off, your remote cont:ro! is now set up to operate your cable box. If your cable box does not tl_rn off, repeat the

instructions above, trying each code number listed for your brand of' cable box. If none of these numbers work:, try each number, 51 through 99.

_Important:	After	setting up	your remote,		be sure	that	your	cable	box can	be
	turned	on with	the	POWER button. Some			of the	cable	boxes	can be
	turned	on with	the	CHANNEL	buttons	or the number			buttons.

setting up the remote control to operate your Mitsubishi

audio component (laserdisc player or A/V receiver)

OTurn offyour audio component.

Set the select switch on the top of the remote to choose the layer you want to set up. For a laserdi:_c player, choose CABLE or VCR-B. For an A!V receiw_r, or CD i?layer, choos,e CABLE.

While holding in the POWER button on the remote control, enter one of these code numbers:

•For a Mitsubishi A/V receiver, compact disc: 30, 31 or 35

•For a Mitsubishi laserdisc player: 22 or 33

•For a Yamaha A/V receiver, compact disc: 36 or 37

Be sure to enter both digits of the cede number. If more than one number is listed, try the first one.

O Release the POWER button.

O Press the POWER button again. Yo,_r audio component should turn on. If it does, your remote control is now set up to operate your cable box. If it does not turn orL, repeat the instructions above, trying the other code number listed for your component.

(See "using your remote control to operate your Mi'Lsubishi laserdisc player" and "using your remote control to operate

your Mitsubishi audio products" in th:is chapter for information on using the remote to operate your A/V components.)

Getting Started 41