Mitsubishi Electronics CS-35207, CK-35308, CK-32307, CS-40307 Selecting source of the PIP image

Selecting source of the PIP image

0 Turn your VCR on.

O Turn the PIP image on.

O Press the SOURCE button on the remote control repeatedly until the VCR picture appears in the PIP image.

O If you want to select a source other than the VCR, continue pressing the SOURCE button. The source will change as follow_';:

_TV--_ INPUT-1---_- INPUT-2 -j

_>Important:

_ Important:

To change the main image wlhile a PIP image is displayed, press the input button (INPUT) on the control panel or on the remote control.

To see two different channels at the same time, you must:

•connect a second tuning source (such as a VCR) to an input as shown in the connection diagrams in Chapter 2 of this manual

•use the SOURCE button to select the input for the second tuning source

86 Chapter 4: Using the Special Features