Mitsubishi Electronics CS-35207 Troubleshootingcont, Problems, Possible, Solutions, For More

Troubleshooting(cont.)

Problems

The remote control doesn't work.

Possible	Solutions	For More			Information
Check	that the batteries are	See	"Getting			ready		to	use
installed	correctly.	the	remote		control"			in
		Chapter 1 fbr an explanation
		of how		to	install		batteries			in
		the	remote		control.
Check that the select switch		See	"Remote			control		buttons
is set to "TV."		and	functions"				in Chapter			1,
		which		explains			where		the
		select		switch		is	located.

The TV takes several

seconds to respond to button commands.

Be sure that you are pointing the tip of the remote control toward the TV from a distance of no more than 20 feet.

•Use the ENTER buttonto avoiddelays.

See "Getting ready to use the remote control" in

Chapter 1, which contains pointers for using the remot( control.

See "Changing channels" in

Chapter 3, which explains 1:he function of the ENTER

button.

You can't access a channel.

You can't see a different channel in the reduced PIP image.

•Be sure that the channel you want to view is programmed into memory.

•Check that the TV is tuned

to the correct input source (antenna) for that channel.

•Use the SOURCE button to change the source of the PIP image.

Make sure you have a

second source, such as a

VCR, turned on and (.on- nected to your TV.

See "Memorizing channels" in Chapter 3, which explain,, how to program channels into the TV's memory.

See "Selecting the input source" in Chapter 3, which explains how to change the input source.

•See "Using the Picture-in- Picture (PIP) Modes" in Chapter 4.

92 Chapter 5: Troubleshooting