Mitsubishi Electronics CS-35207, CK-35308, CK-32307, CS-40307 manual Naming the channels

Naming the channels

You can name the channels your TV receives, helping you keep track of the many channels available. After you enter a name, it will appear on-screen, next to the channel number.

[]	Customize		Display
[]	Select	Menu		Type
[]	Name	the	Input
[]	Name	the	Channels
[]	Use Video		Mute
]Select		Menu		Language
]ADJUST			to select
	ENTER		to	enter
	MENU		to go back
[]	Name	the	Channels
[]	Channel		:003
_]	New	name	: ....
_	ADJUST		to	select
_]	ENTER		to	enter
	MENU		to	go back

]Name the Channels

[] Channel : 003

[_New pame : AB- -

]ADJUST to select

ENTER to enter

MENU to go back

O Press the MENU button on the remote control. The Main Menu will appear on the screen.

Use the ADJUST buttons to select "Customize Display." Press ENTER.

You will see the "Customize Display" screen. Use the AD- /rUSTbuttons to select "Name the Channels." Press ENTER.

	O Use the ADJUST buttons,
	channel	controls	or number
	buttons to select the channel
	you want to name. Press
	ENTER.
	Use the ADJUST buttons and
	_h_ ENTER button to select,
	each letter in the new name.
l	You can use letters (A - Z),
	numbers	(0 - 9),	or symbols (:/.

,( )!"#S % &'blank+;< = >? blank - ).

When you are ,_etting the name, yc,u can clear it by pressing the C.LNCEL button when the left- most position is pointed.

V_]_en you are :finished, press the HOME button to return to

normal viewin_

_Important: The names you set will appear instead of the call letters being

supplied by Extended Data Services (XDS).

_Important: You can name up to thirty channels. If you try to name more, the message "Memory over!" will indicate that the memory is full. If the memory is full and you want to name a channel, you must use the above steps to clear the name for an existing channel. You can then select the new channel to name

58 Chapter 3: Operating Your TV