Mitsubishi Electronics CS-35207 EImportant, using your remote control to operate your cable box

Using the remote control to operate VCRs, cable

boxes and other components (cont.)

	notes	about	your	remote	control
E>Important:	Sometimes		manufacturers		will	change	their' products,	or they m_
	use more than one code. If t_is is the case, your remote may not t
	able to operate your VCR or cable box.
_>Important:	When	you	replace	the batterles		in your	remote control,	the remot
	will usually return to its initial setting. You may need to set up
	your	remote	again.

using your remote control[ to operate your VCR

After you have set up your rent ote control for your particular br_ of VCR, you can use the remote to operate your VCR.

q[]} Use the select switch on _:he remote control to choose the laye that you set up to operate your VCR: VCR-A or VCR-B.

Point the remote control at the VCR and[ press the desired buttons.

If you are using a Mitsubishi VCR, you will be able to use all oft buttons on the remote control to operate your VCR except for MU_

VOLUME and the PIP function buttons, which will always oper_ the TV itself.

If you are using another bra_ d of VCR, you (:an use the POWER, CHANNEL, REC, STOP, PAUSE, REW, PLAY, and FF

buttons to operate your VCR.

using your remote control to operate your cable box

After you have set up your remote control for your particular bra of cable box, you can use the remote to operate your cable box.

Use the select switch on the remote control to choose the laye_ that you set up to operat_ y_ur cable box: CABLE or VCR-B.

Point the remote control at the cable box and press the desire, buttons.

You can use the POWER, CHA2qNEL, numbers (0-9), and ENTEI buttons to operate your cable box. If you are using an RCA DSS o_

PRIMESTAR®receiver, you may be able to use additional buttons

42 Chapter 3: Operating Your TV