Mitsubishi Electronics CS-40307, CK-35308, CK-32307 Changing channels while using the PIP modes

Changing channels while using the PIP modes

Important:

_Important:

_Important:

You can use the buttons on the remote control to change the channels of both the main image and the small PIP image, as if your TV had two tuners.

To do this:

_]} Press the VCR channel button (VCR CH) on the remote control to change the channe]L of the PIP image.

O Press the CHANNEL button on the remote control to change

the channe:L of the main image.

When the source of both the main image and the PIP image is the TV, the VCR channel (VCR C,H) button will not change the chan- nels of the main image or the PIP image.

You must have set up the '_VCR-A" layer of your remote :for this button to work correctly. (See "Using the remote control to operate

VCRs, cable boxes and other equipmnent" in Chapter 3.)

If you use a cable box with your VCR, do not use this button unless

your VCR is able to control your cable box. Otherwise, switch the remote to the cable layer and use the main channel .butt.ons.

Using thePicture-in-Picture (PIP) Modes 87