Mitsubishi Electronics CK-35308 manual using the QuickView TM option, Setting the QuickView memory

Changing channels (cont.)

using the QuickView TM option

The "QuickView"		feature		can
work in	two ways:	to	recall	the last
channel	viewed (Last		Channel
Recall),	or to recs-ll	a	channel	you
put into	QuickView	memory.

• If you have not; memorized any channels into QuickView Memory, "Last Channel 19',ecall" allows you to use the qN button to switch back and forth between the last two channels viewed.

• "QuickView Memory" allows you to use the QV button to switch back and forth between the last channel you were

_atching and the channel you p at into QuickView memory.

Setting the QuickView memory

OTune to the channel you wish to memorize.

Press and hold the QV button ibr about 2 seconds. The channel

numbers will appear on the screen, indicating that you have memorized that channel.

After changing to another channel, press the QV button to

immediately return to the memorized channel.

OIf you press the QV button while watching the memorized channel, you will return to the last channel viewed.

i.>Important: The memorized QV channel will remain in memory until you replace it with a new channel using the procedure above. To restore

the Last Channel Recall feature, rc,-memorize the channels. (See

"Memo_'izing Channel,,;," in this chapter.) This procedure also

erases all of your SuperQuickView channels and channel names.

48 Chapter 3: Operating Your TV