Mitsubishi Electronics EX320U-ST user manual System Setup Blank Timer

	Projector Position		Front Table/Rear Table/Rear Ceiling/
			Front Ceiling
	Auto Power Off		Disable/5 min/10 min/15 min/20 min/25
4.			min/30 min
			Disable/5 min/10 min/15 min/20 min/25
SYSTEM SETUP: Blank Timer
			min/30 min
Basic
	Panel Key Lock		On/Off
	Timer Controller		Disable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/12
			hr
	Splash Screen		Black/Blue/MITSUBISHI
	Quick Cooling		On/Off
		Mute	On/Off
	Audio Settings	Volume
		Standby Audio Out	On/Off
	Standby Monitor Out		Off/On
		Menu display time	5 sec/10 sec/15 sec/20 sec/25 sec/30 sec
	Menu Settings	Menu position	Center/Top-Left/Top-Right/Bottom-Right/
			Bottom-Left
		Lamp mode	Standard/Low
	Lamp Settings	Reset lamp timer
		Equivalent lamp hour
5.	Security Settings	Change password
		Power on lock	On/Off
SYSTEM SETUP:
		Closed Caption
Advanced			On/Off
	Closed Caption	Enable
		Caption Version	CC1/CC2/CC3/CC4
		Control By	RS-232C/LAN
		PJLink Certification	On/Off
		Change PJLink Password
		DHCP	On/Off
	LAN Control Settings	IP Address
		Subnet Mask
		Default Gateway
		DNS Server
		Apply
	Reset All Settings
			Source
6. INFORMATION Current System Status			Setting
			Resolution

Color System

Equivalent Lamp Hour

Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible.

EN-41