The final connection path should be like that shown in the following diagram:
Audio cable (option)
Component Video to |
|
RGB | or |
cable (option) |
AV device
Speakers
Audio cable (option)
If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.
Connecting an S-Video source device
Examine your Video source device to determine if it has an unused
•If so, you can continue with this procedure.
•If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to an S-Video source device:
1.Take an
2.Connect the other end of the
3.If you wish to make use of the projector speaker in your presentations, take a suitable audio cable and connect one end of the cable to the audio output jack of the computer, and the other end to the AUDIO IN jack of the projector.
4.If you wish, you can use another suitable audio cable and connect one end of the cable to the AUDIO OUT jack of the projector, and the other end to your external speakers (not supplied).
Once connected, the audio can be controlled by the projector
the sound" on page 31 for details.
The final connection path should be like that shown in the following diagram:
Speakers
Audio cable (option)
| Audio cable |
AV device | (option) |
|
• If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.
•If you have already made a Component Video connection between the projector and this
