Mitsubishi Electronics user manual Specifications MDT521S

Specifications

Specifications (MDT521S)

Product Specifications		Analog Input	Digital Input
LCD Module	Diagonal:	52" / 132.2 cm
	Pixel Pitch:	0.600 mm
	Resolution:	1920 x 1080 dots (2070000 dots)
	Color:	Over 16 million colors (depending on video card used)
	Brightness:	700 cd/m2 (typ.)
	Contrast Ratio:	2000:1
	Response time:	8 ms (G to G)
	View Angle:	Up and Down 178°, Left and Right 178° @CR>10
Frequency	Horizontal:	15.625 / 15.734, 31.5 - 91.1 kHz
	Vertical:	50.0 / 58.0 - 85.0 Hz
Pixel Clock		13.5 -165.0 MHz	25.0 -165.0 MHz
Viewable Size		1152.0 x 648.0 mm / 45.4 x 25.5 inches
Input Signal
PC-Input:	Video:	Analog RGB Video: 0.7 Vp-p	TMDS
		Input impedance 75 ohm
	Sync:	Separate HV sync: TTL level (Pos./Neg.), Sync-on-green, Composite Sync (0.3Vp-p)
		Input Impedance 2.2K ohm
	Input-terminal:	BNC (R,G,B,H,V), 15 Pin Mini D-sub	HDMI, DVI-D
VIDEO Input:		Composite: 1.0 Vp-p
		Input impedance 75ohm BNC and RCA-PINJACK-INPUT
		Y/C Y: 1 Vp-p C: 0.286 Vp-p Input
		Impedance 75 ohm S-TERMINAL-INPUT
		Component: 1.0 / 0.7 Vp-p
		Input Impedance 75 ohm BNC-INPUT
AUDIO Input:		RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1
CAT5:	In:	Modular connector 8 pin
RS-232C:	In:	9 Pin Mini D-sub
Output Signal
PC-Output:	Video:	Analog RGB Video: 0.7 Vp-p with 75 ohm terminated
	Sync:	Separate HV sync: TTL level (Pos./Neg.)
Output-terminal:		15 Pin Mini D-sub
VIDEO Output:		BNC-OUTPUT x 1, Composite 1.0 Vp-p with 75 ohm terminated
AUDIO Output:		RCA PIN-JACK L/R OUTPUT x 1, 0.15 Vrms with 47k ohm terminated
Speaker Output:		External Speaker Jack 7 W + 7 W (8 ohm)
CAT5:	Out:	Modular connector 8 pin
RS-232C:	Out:	9 Pin Mini D-sub
Resolutions Supported		640 x 480 at 60 Hz to 85 Hz
		800 x 600 at 50 Hz, 60Hz to 85 Hz
		1024 x 768 at 50 Hz, 60Hz to 85 Hz
		1280 x 768 at 50 Hz, 60Hz to 85 Hz
		1360 x 768 at 50 Hz, 60Hz to 85 Hz
		1280 x 1024 at 60Hz to 85 Hz
		1600 x 1200 at 60 Hz
		1920 x 1080 at 60Hz*	( * : Recommended Resolution)
		NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i,1080p
Power Supply		5.6 - 2.4 A @100 - 240 V AC, 50 / 60 Hz
Power Consumption		Max 380 W
	Power Save:	Less than 3 W (Power button OFF/Main power switch ON)
Operational	Temperature:	Landscape: 5 - 40 °C / 41-104 °F, Portrait : 5 - 35 °C / 41 - 95 °F, Face-up: 5 - 35 °C / 41 - 95 °F**
Environment	Humidity:	20 - 80 % (Without condensation)
Storage	Temperature:	-20 - 60 °C / -4 - 140 °F
Environment	Humidity:	10 - 90% (Without condensation)/90%-3.5%x(Temp-40°C) regarding over 40°C
Dimension	Net:	1202 mm (W) x 698 mm (H) x 122 mm (D) / 47.32" (W) x 27.48" (H) x 4.80" (D)
	Gross:	1405 mm (W) x 951 mm (H) x 275 mm (D) / 55.31" (W) x 37.44" (H) x 10.83" (D)
Weight	Net:	88.2 lbs / 40 kg (Approximately)
	Gross:	108.0 lbs / 49 kg
Wall mounting interface		8 Holes (200 mm pitches)
		Optional Multi-purpose Fix Mount
Complied Regulatory		UL60950-1/C-UL/TUV-GS/EN60950-1/FCC-B/DOC-B/EN55022-B
and Guidelines		EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE/BSMI/GOST
Power Management		VESA DPM
Plug & Play		VESA DDC2B, DDC/CI
Accessories		User’s Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,
		Clamper x 2 (To prevent from falling), Clamper x 3 (For securing cables), Clamper x 2

(For securing the power cord and HDMI cable), Screw for CLAMPER x 2, CAT5-TX BOX

Note: Technical specifications are subject to change without notice.

**: When installing the monitor with its screen facing up, ensure that the fan is always running.

English-40