Parts Name and Functions
Buttons, Switch, and Indicator
ON
OFF
Remote control sensor and Power indicator
Receives the signal from the remote control (when using the wireless remote control). See also page 9.
Glows green when the LCD monitor is in active and glows red when the LCD is in POWER OFF mode. When the LCD is in power save mode, it will glow both green and red. When SCHEDULE is enabled, it will blink green and glow red. See page 21. In the case of where a failure is detected, it will blink red.
UP (
) button
Activates the OSD menu when the OSD menu is 
button to move the highlighted area up to select the adjustment with OSD menu.
DOWN (
) button
Activates the OSD menu when the OSD menu is 
button to move the highlighted area down to select the adjustment with OSD menu.
POWER button (
)
Switches the power on/off. See also page 20.
MUTE button
Switches the audio mute ON/OFF.
INPUT button
Acts as SET button with OSD menu.
(Toggle switches between [RGB1], [RGB2], [RGB3], [RGB4], [RGB5], [DVD/HD], [VIDEO<S>] and [VIDEO] .)
PLUS (+) button
Acts as (+) button to increase the adjustment with OSD menu. Increase the audio output level when the OSD menu is turned off.
MINUS (-) button
Acts as
EXIT button
Activates the OSD menu when the OSD menu is
Brightness sensor (front, rear)
Sensor for the auto brightness function.
This function controls the screen brightness depending on the ambient light for easy viewing.
In addition, it changes the screen brightness depending on the ambient light and what are displayed on the screen to reduce power consumption as low as possible. See page 25, 33.
Main Power Switch
On/Off Switch to turn main power on/off.
NOTE: Control Key Lock Mode
This control completely locks out access to all Control Key functions. To activate the control key lock function, press both of “
” and “
” and hold down simultaneously for more than 3 seconds. To resume back to user mode, press both of “
” and “
” and hold simultaneously for three (3) seconds.
