Mitsubishi Electronics MDT521S Power Indicator, Using Power Management, Selecting a video source

Power Indicator

	Status
Power ON	Green
Power OFF	Red
Power Standby when	Red On
“SCHEDULE” is enable	Green Blinking
Power Standby	Red, Green
Diagnosis	Red Blinking
(Detecting failure)	* See troubleshooting on
	page 38

Using Power Management

The LCD monitor follows the VESA approved DPM Power Management function.

The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fixed period.

The power management feature on your new display has been set to the “ON” mode. This allows your display to enter a Power Saving Mode when no signal is applied. This could potentially increase the life and decrease the power consumption of the display.

Selecting a video source

To view a video source:

Use the input button to set [VIDEO].

Use the COLOR SYSTEM menu to set [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.

Picture Size

RGB 1, 2, 3, 4, 5 FULL NORMAL CUSTOM

DVD/HD, VIDEO<S>,						REAL
	FULL		NORMAL				DYNAMIC
VIDEO		REAL			CUSTOM
Signal Type NORMAL SIZE				Recommended Size
			NORMAL

4:3

DYNAMIC

FULL

Squeeze

NORMAL: Display by the inputed signal aspect ratio by PC signal, or display in 4:3 aspect ratio at DVD/HD or VIDEO signal.

FULL: Display in entire screen.

DYNAMIC: Expand 4:3 pictures to the entire screen with non-linearity. (Some round image will be cut by expansion.) CUSTOM (ZOOM): Image can be expanded beyond the active display area. The image which is outside of active dia- play area is not displayed.

REAL: Image will be displayed 1 by 1 pixel.

ZOOM

ZOOM

Picture Mode

RGB 1, 2, 3, 4, 5 HIGHBRIGHT STANDARD sRGB

DVD/HD, VIDEO<S>, HIGHBRIGHT STANDARD CINEMA VIDEO

Audio Source Switching

You can switch the audio source using the AUDIO INPUT button.

RGB 1, 2 HDMIAUDIO1 AUDIO2 AUDIO3

Other than	AUDIO1	AUDIO2	AUDIO3
RGB 1, 2

Control Lock Mode

This function disables the operation buttons so that the ad- justments you make are not changed when they are pressed. To disable the buttons, press and hold down the and buttons together for at least 3 seconds.

To enable the buttons, press and hold down the and buttons together for at least 3 seconds again.

English

English-21