Avaya P332G-ML manual LED Name Description LED Status

Chapter 6 Avaya P332G-ML Front and Rear Panels

Table 6.1	Avaya P332G-ML LED Descriptions (Continued)
LED Name		Description	LED Status
OPR		CPU Operation	OFF – Module is booting
			ON – Normal operation
			OFF – Module is a slave in a stack
			ON – Module is the master of the stack and
			the Octaplane and Redundant (optional)
SYS		System Status	cable(s) are connected correctly.
			This LED will also light in Standalone mode.
			Blink – Box is the master of the stack and the
			Octaplane is in redundant mode.
ROUT		Routing Mode	OFF – Layer 2 mode
			ON – Router mode
The following Function LEDs apply to all ports
			ON – Link is OK
LNK		Port Status	OFF – Port is disabled
			Blink – Port is enabled, but Link is down
COL		Collision	Always OFF. All ports are full-duplex only.
			OFF – No transmit activity
Tx		Transmit to line
			ON – Data transmitted on line from the
			module
			OFF – No receive activity
Rx		Receive from line
			ON – Data received from the line into the
			module
FDX		Full Duplex mode	Always ON. All ports are full-duplex only.

28 Avaya P332G-ML User’s Guide