Avaya P332G-ML manual Lag

					Chapter 6 Avaya P332G-ML Front and Rear Panels
Table 6.1	Avaya P332G-ML LED Descriptions (Continued)
LED Name			Description			LED Status
						OFF – No flow control.
						ON – One of the three possible flow control
FC			Flow Control			modes is enabled.
						Note: FC LED for Gigabit Ethernet ports
						reflect the last negotiated mode when
						autonegotiation is enabled and the link is
						down.
Hspd			High Speed			Always ON – 1000 Mpbs mode only
LAG			Link Aggregation			OFF – No LAG defined for this port
			Group (Trunking)			ON – Port belongs to a LAG
Note: All LEDs are lit during reset.
Table 6.2		Avaya P332G-ML <- -> Select buttons
Description				Function
Left/Right				Individual – select LED function (see table above)
Reset module				Press both right and left buttons together for approximately 2
				seconds. All LEDs on module light up until buttons are
				released.
Reset stack				Press both Right and Left buttons together for 4 seconds. All
				LEDs on stack light up until buttons are released.

Avaya P332G-ML User’s Guide 29