Chapter 3
Installation
Installing and Removing a SFF/SFP GBIC Transceiver
Caution: Use only 3.3V
Use only SFF/SFP GBIC transceivers that use Serial Identification.
The SFF/SFP GBIC transceiver is fastened using a
To Install the SFF/SFP GBIC transceiver:
•Insert the transceiver (take care to insert it the right way up) until it clicks in place.
To Remove the SFF/SFP GBIC transceiver:
1Press the clip on the bottom side of the transceiver.
2Pull the transceiver out.
Specifications
LX Transceiver
A9 µm or 10 µm
A 50 µm or 62.5 µm multimode (MMF) fiber cable may be connected to a 1000Base- LX SFF/SFP GBIC port. The maximum length is 550 m (1,804 ft.) for
50 µm and 62.5 µm cable.
The LX transceiver has a Wavelength of 1300 nm, Transmission Rate of 1.25 Gbps, Input Voltage of 3.3V, and Maximum Output Wattage of
SX Transceiver
A 50 µm or 62.5 µm multimode (MMF) fiber cable may be connected to a 1000Base- SX SFF/SFP GBIC port. The maximum length is 500 m (1,640 ft.) for
50 µm and 220 m (722 ft.) for 62.5 µm cable.
The SX transceiver has a Wavelength of 850 nm, Transmission Rate of 1.25 Gbps, Input Voltage of 3.3V, and Maximum Output Wattage of
Avaya | 11 |
