Chapter 10 Basic Switch Configuration
Network Time Acquiring Protocols Parameter Configuration
The P330 can acquire the time form a Network Time Server. P330 supports the SNTP Protocol (RFC 958) over UDP port 123 or TIME protocol over UDP port 37. Use the CLI commands briefly described below for configuring and display time information and acquiring parameters.
In order to... | Use the following command... |
|
|
|
|
Restore the time zone to its default, | clear timezone |
UTC. |
|
|
|
Configure the time zone for the | set timezone |
system |
|
|
|
Configure the time protocol for use | set time protocol |
in the system |
|
|
|
Enable or disable the time client | set time client |
|
|
Configure the network time server | set time server |
IP address |
|
|
|
Display the current time | show time |
|
|
Display the time status and | show time parameters |
parameters |
|
|
|
Display the current time zone offset | show timezone |
|
|
Get the time from the time server | get time |
|
|
Avaya | 51 |