Chapter 11 Avaya P330 Layer 2 Features

Figure 11.3 Multiple VLAN Per-port Binding Modes

Bind to All

-Any VLAN in the range of 1-4094 will be allowed access through this port

-Intended mainly for easy backbone link

Static Binding

-The user manually specifies the list of VLAN IDs to be bound to the port, up to 253 VLANs

-Default mode for every port

-Only VLAN 9, and any otherVLANs statically configured on the port will be allowed to access this port

Bind to Configured

-The VLAN table of the port will support all the Static VLAN entries and all the ports’ VLAN IDs (PVIDs) present in the switch

-VLANs 1,3,5,9,10 coming from the bus will be allowed access through this port

-All the ports in Bound to Configured mode will support the same list of VLANs

Automatic VLAN Learning

The Avaya P330-ML learns the VLANs automatically from traffic received on ports in “bind-to-all” mode. The maximum number of VLANs, 253, includes these dynamically learned VLANs and any VLANs you added manually.

When the VLAN list for the switch is full, no further dynamic learning or manual VLAN configuration will be possible until the dynamically learned VLANs are deleted from the table. This is accomplished with the clear dynamic-vlansCLI command.

Ingress VLAN Security

When a VLAN-tagged packet arrives at a port, only the packets with the VLAN tag corresponding to the VLANs which are configured on the port will be accepted. Packets with other VLAN tags will be dropped.

Avaya P332G-ML User’s Guide

61

Page 75
Image 75
Avaya P332G-ML manual Automatic Vlan Learning, Ingress Vlan Security