
Chapter 11 Avaya P330 Layer 2 Features
•The 802.1w standard defines differently the default path cost for a port compared to STP (802.1d). In order to avoid network topology change when migrating to RSTP, the STP path cost is preserved when changing the spanning tree version to RSTP. You can use the default RSTP port cost by using the CLI command set port spantree cost auto.
Spanning Tree Protocol CLI Commands
The following table contains a list of CLI commands for the Spanning Tree feature. The rules of syntax and output examples are all set out in detail in the Reference Guide.
Table 11.3 Spanning Tree Protocol CLI Commandss
In order to... | Use the following command... |
|
|
|
|
Enable/Disable the spanning tree | set spantree |
application for the switch |
|
|
|
Set the bridge priority for spanning | set spantree priority |
tree |
|
|
|
Set the RSTP bridge spanning tree | set spantree |
| |
|
|
Set the RSTP bridge | set spantree |
parameter |
|
|
|
Set the RSTP bridge | set spantree |
time prameter |
|
|
|
Select between STP operation or | set spantree version |
RSTP switch operation |
|
|
|
Display the bridge and | show spantree |
spanning tree information |
|
|
|
Set the TX hold count for the STA | set spantree priority |
|
|
Add a port to the spanning tree | set port spantree enable |
application |
|
|
|
Remove a port from the spanning | set port spantree disable |
tree application |
|
|
|
Set the port spantree priority level | set port spantree priority |
|
|
Set the cost of a port | set port spantree cost |
|
|
Avaya | 67 |