Remote Control Functions: Care and Operation
-When using the remote control, aim it at the remote control sensor on the TV.
-Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press the key again as necessary.
Operation
Installing the Batteries:
(Figure 2)
1.Remove the remote control’s back cover by gently pressing the ridged tab in the direction of the arrow and sliding off the cover.
2.Load the batteries, making sure the polarities (+) and
For Best Results from the Remote Control:
• Be within 20 feet of the equipment.
CABLE/DBS/DTV VCR DVD
TV
AUDIO
1 2 3
POWER
4 5 6
MTS
7 8 9
GUIDE
SQV 0 QV
•Do not press two or more buttons at the same time unless instructed to.
•Do not allow to get wet or become heated.
•Avoid dropping on hard surfaces.
•Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth.
•Do not mix new and old batteries.
•Do not heat, take apart, or throw batteries into fire.
•Use only AA batteries.
Operating the Remote Control:
You can use the remote to control the TV, CABLE/DBS/DTV, VCR, DVD, and AUDIO products. Select the product you want to control by moving the slide switch to the appropriate position. The remote control has been preset to operate the TV and other Mitsubishi prod- ucts. To program the remote control to operate other products, see Use of the Remote Control with Other A/V Products, page 20.
Installing Batteries
size AA
batteries
Figure 2. Installing the batteries.
DEVICECHVOLMUTE
TV MENU |
|
| HOME |
DEVICE |
|
|
|
MENU |
|
| CANCEL |
SLEEP | INFO | AUDIO | VIDEO |
PIP CH | PIP | EXCH | ZOOM+ |
| PIP DEVICE | FORMAT | ZOOM– |
REC | PAUSE | ||
| PLAY |
| |
REW/REV |
|
| FF/FWD |
STOP
Figure 1. Remote Control Functions.
IMPORTANT
The remote control may return to its initial setting when the batteries are changed. You may need to reprogram.
