Mitsubishi Electronics PK20 user manual Image, EN-26

1 IMAGE

BRIGHTNESS MODE...	Use to select the brightness mode.
	• The white color looks greenish so that LED lights out become
		maximum, when the brightness mode is set to high.
	• During the high brightness mode, color temperature is not
		selectable.
	•	Choose Low mode to extend the battery wear.
CONTRAST	Use to adjust the image contrast. The contrast becomes higher as
	the value increases.
BRIGHTNESS	Use to adjust the image brightness. The image becomes brighter
	as the value increases.
COLOR TEMP	Use to adjust the color temperature.
	In USER mode, the intensity of R, G, B can be adjusted.
COLOR	Use to adjust the color intensity of the image.
TINT	Use to adjust the color balance of the image. The color balance
	shifts to green as the value increases and shifts to purple as
	the value decreases. (Available only when VIDEO or S-VIDEO
	or COMPONENT (Y,CB,CR) is chosen as the source.)
	* When the TV50 (PAL, SECAM) signal is input, TINT can’t be adjusted.
SHARPNESS	Use to adjust the image sharpness. The image becomes sharp as the value increases. (Not available
GAMMA MODE	with certain signals.)
	Use to set the gamma optimally.
	• DYNAMIC - Select when viewing images supplied from the computer.
	•	STANDARD - Select when viewing images supplied from the video device.
	•	THEATER - Select when viewing images of which brightness should be kept relatively low, such
		as movies and music performance.

EN-26