For battery charging
1. Move the battery latch to the open side.
Be sure to remove the adjustable rubber foot before attaching the battery pack.
Keep the adjustable rubber foot in a safe place. (such as the carrying bag)
2. Position the projector on the battery.
EN-12
3. Match the battery carefully until it fits in place.
4
6
5
4.InserttheplugfromtheACadapterintotheDCINterminal.
5.Insert the appropriate end of the power cord into the AC adapter.
6.Insert the plug on the power cord into a wall outlet.
The CHARGE indicator lights red when charging is started and turns off when charging is completed.
We recommend that you full charge the battery all the time.
Important:
Be sure to remove the battery pack before placing the projector into the carrying bag. Otherwise, it can lead to fire.
Warning:
Do not change the battery except this method. It may cause battery exploding.
Do not remove the battery from the projector when operating.
When remove the battery from the projector, power off the projector and unplug AC adaptor.
